Reliable control and super-fast trigger
The W1 TTL radio remote control is designed for Olympus cameras with a TTL function. You can control flashes that have an inbuilt Walimex pro W1 receiver system (e.g. Light Shooter 360 TTL, Flash2Go 600 TTL) directly by radio (2.4 GHz). The camera with a W1 radio trigger on it controls the exposure automatically in TTL mode without having to make manual adjustments. With the Walimex pro W1 TTL radio trigger, data is sent extremely quickly to the flash or several flashes, and they are adjusted accordingly and triggered with minimal delay. The maximum sync time is 1/8,000 seconds (achievable at a maximum exposure time of the camera of 1/8,000 seconds). If you want somewhat different exposure in TTL mode, the exposure can be adjusted up or down manually by three aperture stops (in third stages). Flash exposure bracketing is also possible. Based on the TTL values, an underexposed, a normally exposed and an overexposed image is created, from which the most suitable can be selected. The W1 TTL T-S radio trigger can control up to 6 flash groups at the same time (with one or several flashes).
Fully automatic or manual settings
Instead of fully automatic TTL exposure, you can control the flash output individually via the W1 radio control. Each flash or flash group can be controlled individually so that even difficult-to-access flashes can be adjusted during the shoot. The radio control supports both manual mode and multi mode (stroboscope function). All relevant parameters such as the number of flashes, frequency and output can be adjusted via the remote control. The maximum supported sync time is 1/8,000 seconds (achievable at a maximum exposure time of the camera of 1/8,000 seconds). Exposure with corresponding front and rear curtain sync shutter speeds can be set.
Intuitive to operate
The radio trigger requires 2 normal AA batteries (not included). A clear display makes it easy to adjust the important parameters. The settings can be made easily and for the most part intuitively. A comprehensive instruction manual (German and English) will help with tricky photo shoots.
Tested camera models
The radio trigger works with the following tested Olympus cameras: PEN-F, E-P3. E-P5, E-PL5, E-PL6, E-PL7, E-PL8, E-M1, E-M10II Panasonic: DMC-G85, DMC-GH4, DMC-GF1, DMC-GX85, DMC-LX100, DMC-FX2500GK. If your model is not listed, we recommend a self-test and possibly upgrading your USB-firmware.
technical description
| W1 TTL T-O |
| compatible cameras | Olympus and Panasonic cameras
supports cameras with PC-sync-connection |
| built-in remote transmission system | radio 2.4 GHz |
| modulation operation | MSK |
| power supply | 2*AA-batteries |
| exposure | |
| mnual adjustment yes | yes |
| TTL auto flash E-TTL | TTL |
| multiple flash | yes |
| TTL | |
| high-speed synchronization | yes |
| flash exposure compensation | yes, ± 3 in 1/3 increments |
| flash exposure lock | yes |
| focusing light beam | switch on manually |
| sync. 2. shutter curtain | yes (setting on the camera) |
| wireless flash | |
| controllable slave group | max. 5 groups (A/B/C/D/E) |
| transmission range (approx.) | up to 100 m |
| channels | 32 |
| other aspects | |
| adjusting the synchronization delay | yes (0 ~ 10 ms, unit 100 µs) |
| acoustic signal | ON/OFF |
| ZOOM-setting | Control the zoom setting of the flash over
the transmitter |
| output interface | transmitter: connect to input and output via
PC-cable |
| firmware-upgrade | update via micro USB port |
| mermory function | settings are saved for 2 seconds after the
last operation and restored after a reboot |
| dimensions/weight | 72x75x52 (mm) / 90 g |
General information
| Product Type
|
flash radio trigger |
| Length
|
72mm |
| Height
|
52mm |
| Width
|
75mm |
| Weight
|
90g |
Specifications
| Range
|
10000cm |
| Transfer
|
Funk |
| Power Supply
|
2x AA batteries or Ni-MH batteries |
| Frequency Channels
|
32 |
Packaging
| Girth
|
385mm |
| Height of Packaging
|
110mm |
| Length of Packaging
|
110mm |
| Weight incl. Packaging
|
140g |
| Width of Packaging
|
55mm |
Included in delivery
- 1× Walimex pro W1 TTL T-O trigger (batteries not included)
- 1× comprehensive instruction manual (German/English)
