Facilitez votre quotidien en studio avec la télécommande walimex pro: Surtout pour les réglages d'éclairage fastidieux et les longues prises de vue, vous pouvez commander l'éclairage de tout votre studio en quelques clics et vous épargner ainsi beaucoup de temps, de courses et de fatigue. La télécommande peut en effet commander simultanément plusieurs flashes de studio walimex PLUS. L'affectation multiple des sept touches de commutation du flash vous permet de créer jusqu'à 7 groupes d'éclairage. Grâce à la technologie radio pratique, vous pouvez régler facilement la lumière pilote, la puissance de l'éclair, la cellule photoélectrique et bien d'autres choses encore. L'écran large et clair vous informe en permanence de tous les réglages.
La télécommande compacte allie un design ergonomique et une technologie avancée : les touches fluorescentes assurent non seulement une sécurité d'utilisation maximale, même dans l'obscurité, mais aussi une réalisation rapide de tous vos souhaits d'éclairage en studio. La portée de la télécommande est d'environ 30 m, des conditions idéales pour une utilisation dans des lieux et des studios photo plus grands. La télécommande dispose en outre d'une fonction de mise en marche et d'arrêt qui vous permet d'économiser de l'énergie sans devoir retirer les piles au préalable. Une dragonne pratique complète le tout et constitue un outil irremplaçable dans le quotidien trépidant du studio.
La livraison comprend les 2x piles AAA nécessaires.
  ;
Toutes les évaluations :
Great accessory! Once the system configured, this remote control works very reliably. You cannot imagine to work without it if you tried once. Preset memories would be very welcome, to keep certain number of frequently used studio configuration flash settings. Attention, there is a serious error in the users guide. In the flash pairing procedure, the big control button (power) is indicated for being pressed after one of digit buttons. This is wrong! You need to press Audio button instead. I was close to claim when I discovered that, by chance. From observing the operation, I conclude that the communication is one-way, from the remote to the flash, which was expected, as the remote with receiving radio would consume the batteries much faster. To make sure that the flash settings correspond to values on the remote, I go through all flash numbers and press up then down button ones. It would be practical to have a Refresh button that would do this refresh procedure automatically for you. Overall, this remote control is a great accessory that quickly becomes an inevitable companion.
Once the system configured, this remote control works very reliably. You cannot imagine to work without it if you tried once. Preset memories would be very welcome, to keep certain number of frequently used studio configuration flash settings. Attention, there is a serious error in the users guide. In the flash pairing procedure, the big control button (power) is indicated for being pressed after one of digit buttons. This is wrong! You need to press Audio button instead. I was close to claim when I discovered that, by chance. From observing the operation, I conclude that the communication is one-way, from the remote to the flash, which was expected, as the remote with receiving radio would consume the batteries much faster. To make sure that the flash settings correspond to values on the remote, I go through all flash numbers and press up then down button ones. It would be practical to have a Refresh button that would do this refresh procedure automatically for you. Overall, this remote control is a great accessory that quickly becomes an inevitable companion.
