Ideal for small rooms and permanent installation
For studios in which some setups are often or constantly used, the permanent installation of a stand is a good idea. A ceiling stand like this one is also particularly suitable for cramped conditions, as no protruding stand legs take up space on the floor.
Flexibly applicable
The stand features a load capacity of up to approx. 6 kg. You can extend the 2 cm thick rod between 34 and 54 cm. The 5/8 spigot is equipped on one side with a 1/4 and on the other with a 3/8 inch thread connection. It can be mounted suspended or standing up. This gives you a lot of flexibility when setting up. Wall mounting is not recommended because of the strong leverage effect on the base.
Stable mounting
The scope of delivery includes four heavy-duty anchors for concrete with suitable fastening screws. The high load-bearing capacity of the stand creates strong forces at the base. Therefore, make sure that your ceiling is suitable for such loads. Brick vaults, drywall constructions or suspended ceilings, for example, are either not suitable for such forces or must be prepared with chemical or liquid anchors. Therefore, please inform yourself before the assembly at a good DIY store. The mounting plate of the stand has two differently sized holes in each of the four corners. Thus different mounting options are available. Four heavy duty wedge anchors for concrete are included.
General information
| Product Type
|
Wall lamp holder |
| Material
|
Aluminium |
| Product Color
|
Black |
Specifications
| Min. Length
|
340cm |
| Max. Length
|
540cm |
| Max. Load Tripod
|
6000g |
| Pack Measure
|
35cm |
| Fastening Tripod Connection Adapter
|
Variable closure system |
| Connection
|
5/8 Spigot, 1/4 Inch with thread connection |
| Weight tripod
|
750g |
| Tripod Excerpts
|
2St. |
| Extensible
|
Yes |
| Number of Tripod Segments extendible
|
1 |
| Diameter 1st Tripod Segment (from below)
|
23mm |
| Diameter 2nd Tripod Segment (from below)Diameter 2nd Tripod Segment (from below)
|
19mm |
| Transportation Bag, Tripod included
|
No |
| Type
|
Lamp tripod |
| Material middle column
|
Aluminium |
Packaging
| Girth
|
570mm |
| Height of Packaging
|
90mm |
| Length of Packaging
|
349mm |
| Packaging Material
|
Carton |
| Packaging with Euro Hole
|
No |
| Weight incl. Packaging
|
935g |
| Width of Packaging
|
150mm |
Included in delivery
- 1x Walimex pro Ceiling Lamp Stand 34-54cm
- 1x Double spigot with 1/4 and 3/8 inch thread connection
- 1x Fastening material
